U-LOC FAMILY SHOWN / PACKAGING VARIES BY GRADEU-LOC / Two-component polyurethane adhesives
U-LOC 9023
Two-component polyurethane adhesive for structural bonding and sandwich-panel assembly, including pre-treated metals, plastics and hard foams.
Request current TDSSelection depends on the actual materials, joint and service conditions. Confirm suitability before use.
APPLICATION / SELECTION
What to check
before selecting.
Selection considerations for U-LOC 9023
Confirm the substrate preparation, specified mixing method and how the adhesive will be distributed across the joint. For panel work, review positioning, pressure and fixture requirements, then verify the finished assembly against its intended loads and service environment.
Read the selection guide01 / TECHNICAL OVERVIEW
Technical properties
Typical properties from the available product literature. Values are tied to the stated test conditions and do not replace the current technical data sheet.
| Mix ratio | 5:1 by weight |
|---|---|
| Chemistry | Two-component polyurethane |
Where data is incomplete or inconsistent across source documents, a value is not shown. Request the current TDS for final selection.
02 / DOCUMENTATION
Request documentation
Request the current TDS, safety data sheet or catalogue. Our team will confirm the relevant document and respond to your enquiry.
Need the current technical data sheet?
Include U-LOC 9023 in your application brief and request the current grade-specific documentation.
Request technical data03 / BEFORE YOU SPECIFY
A product is part
of a process.
- 01Identify the exact substrates and surface condition.
- 02Define joint geometry, operating conditions and process time.
- 03Review the current TDS and safety data before handling.
- 04Validate the adhesive on representative assemblies.
CONTACT PARSON
Make the next
connection.
Tell us how you plan to use U-LOC 9023. Share the details that matter to your assembly.
Discuss an applicationsales@parsonadhesives.in