Methacrylate adhesives · 1:1
PARTITE 7300
General purpose adhesive with excellent bond to plastics and metal, Composites surface.
Request current TDS
PARTITE FAMILY SHOWN / PACKAGING VARIES BY GRADEPARTITE / Methacrylate adhesives · 1:1
PARTITE 9310
PARTITE 9310 is a two-component, 100% reactive structural adhesive specifically formulated for bonding thermoplastics, thermosets, metals and composite assemblies.
Technical data on requestMethacrylate adhesivesIndustrial use
Selection depends on the actual materials, joint and service conditions. Confirm suitability before use.
APPLICATION / SELECTION
What to check
before selecting.
Selection considerations for PARTITE 9310
Review substrate compatibility and preparation before choosing the dispensing and mixing arrangement. Confirm the specified component ratio, how the joint gap will be maintained and the cure stage needed before handling; validate the finished assembly against the expected loads and exposure.
Read the selection guide01 / TECHNICAL OVERVIEW
Technical properties
Typical properties from the available product literature. Values are tied to the stated test conditions and do not replace the current technical data sheet.
| Working time (min) | 8–15 |
|---|---|
| Fixture time (min) | 25–35 |
| Full cure | 24 hours |
| Mix ratio by volume | 1:1 |
Where data is incomplete or inconsistent across source documents, a value is not shown. Request the current TDS for final selection.
02 / DOCUMENTATION
Request documentation
Request the current TDS, safety data sheet or catalogue. Our team will confirm the relevant document and respond to your enquiry.
TECHNICAL DATA / REQUEST FROM OUR TEAMRequest PARTITE 9310 technical data sheet
SAFETY DOCUMENTATIONRequest the safety data sheetConfirm handling, storage and safety information with our team.
PDF / PRODUCT CATALOGUERequest the Parson product catalogueOriginal catalogue • specifications and availability subject to confirmation
03 / BEFORE YOU SPECIFY
A product is part
of a process.
- 01Identify the exact substrates and surface condition.
- 02Define joint geometry, operating conditions and process time.
- 03Review the current TDS and safety data before handling.
- 04Validate the adhesive on representative assemblies.
CONTINUE EXPLORING
Related grades.
All PARTITE productsMethacrylate adhesives · 1:1
PARTITE 7302
Two-component methacrylate adhesive for structural bonding.
Request current TDS
Methacrylate adhesives · 1:1
PARTITE 7310
High performance with excellent adhesion to wide variety of metal and plastic surfaces.
Request current TDSCONTACT PARSON
Make the next
connection.
Tell us how you plan to use PARTITE 9310. Share the details that matter to your assembly.
Discuss an applicationsales@parsonadhesives.in