Conformal coatings
PARLITE 4753
Medium viscosity; Multi-cure coating for wetting components, low modulus for enhanced thermal cycling performance.
Request current TDS
PARLITE FAMILY SHOWN / PACKAGING VARIES BY GRADEPARLITE / Conformal coatings
PARLITE 4750
Tough, glossy conformal coating with excellent adhesion to wide variety of boards and masks. Fast cure.
Request current TDSUV-curable adhesivesIndustrial use
Selection depends on the actual materials, joint and service conditions. Confirm suitability before use.
APPLICATION / SELECTION
What to check
before selecting.
Selection considerations for PARLITE 4750
Identify the board materials, masks and components that must remain uncoated. Confirm application control and cure access across the populated board, then establish how coverage, cure and the required electrical performance will be checked on the finished assembly.
Read the selection guide01 / TECHNICAL OVERVIEW
Technical properties
Typical properties from the available product literature. Values are tied to the stated test conditions and do not replace the current technical data sheet.
| Viscosity @25°C (cps) | 150–200 cps |
|---|---|
| Shore Hardness | 85D |
| Modulus of Elasticity (psi) | 60,000– 70,000 |
| Dielectric Strength (volts/mil) | 1,700– 1,900 |
Where data is incomplete or inconsistent across source documents, a value is not shown. Request the current TDS for final selection.
02 / DOCUMENTATION
Request documentation
Request the current TDS, safety data sheet or catalogue. Our team will confirm the relevant document and respond to your enquiry.
Need the current technical data sheet?
Include PARLITE 4750 in your application brief and request the current grade-specific documentation.
Request technical dataSAFETY DOCUMENTATIONRequest the safety data sheetConfirm handling, storage and safety information with our team.
PDF / PRODUCT CATALOGUERequest the Parson product catalogueOriginal catalogue • specifications and availability subject to confirmation
03 / BEFORE YOU SPECIFY
A product is part
of a process.
- 01Identify the exact substrates and surface condition.
- 02Define joint geometry, operating conditions and process time.
- 03Review the current TDS and safety data before handling.
- 04Validate the adhesive on representative assemblies.
CONTINUE EXPLORING
Related grades.
All PARLITE productsCONTACT PARSON
Make the next
connection.
Tell us how you plan to use PARLITE 4750. Share the details that matter to your assembly.
Discuss an applicationsales@parsonadhesives.in