Medical-device assembly
PARLITE 4011
Specifically designed for bonding hypodermic needles into hubs. Low viscosity with excellent adhesion to thermoplastic and steel.
Request current TDS
PARLITE FAMILY SHOWN / PACKAGING VARIES BY GRADEPARLITE / Medical-device assembly
PARLITE 4035
Specially designed UV Curable Adhesive for Hub to Needle bonding.
Request current TDSUV-curable adhesivesIndustrial use
Selection depends on the actual materials, joint and service conditions. Confirm suitability before use.
APPLICATION / SELECTION
What to check
before selecting.
Selection considerations for PARLITE 4035
Confirm the exact device materials, joint design and access for the specified curing process. Review the current grade documentation against the device’s own processing and validation requirements, including any downstream treatment; a catalogue application does not establish suitability for a finished device.
Read the selection guide01 / TECHNICAL OVERVIEW
Technical properties
Typical properties from the available product literature. Values are tied to the stated test conditions and do not replace the current technical data sheet.
| Viscosity @ 25°C cps | 1400 - 1700 cps |
|---|---|
| Color | Clear |
| Shear Strength | 2,000 psi |
| Shore Hardness | 75D |
Where data is incomplete or inconsistent across source documents, a value is not shown. Request the current TDS for final selection.
Inclusion in a medical-device catalogue range does not establish approval for a finished device. Application-specific qualification is required.
02 / DOCUMENTATION
Request documentation
Request the current TDS, safety data sheet or catalogue. Our team will confirm the relevant document and respond to your enquiry.
Need the current technical data sheet?
Include PARLITE 4035 in your application brief and request the current grade-specific documentation.
Request technical dataSAFETY DOCUMENTATIONRequest the safety data sheetConfirm handling, storage and safety information with our team.
PDF / PRODUCT CATALOGUERequest the Parson product catalogueOriginal catalogue • specifications and availability subject to confirmation
03 / BEFORE YOU SPECIFY
A product is part
of a process.
- 01Identify the exact substrates and surface condition.
- 02Define joint geometry, operating conditions and process time.
- 03Review the current TDS and safety data before handling.
- 04Validate the adhesive on representative assemblies.
CONTINUE EXPLORING
Related grades.
All PARLITE productsMedical-device assembly
PARLITE 4025
Suitable for intravenous tube sets, oxygenators, reservoirs, diagnostics electronics etc. Excellent adhesion to polycarbonates and rigid PVC.
Request current TDSMedical-device assembly
PARLITE 4031
Specially designed for breathing circuits, butterfly sets and masks. Low viscosity with excellent adhesion to plasticized PVC and metals.
Request current TDSCONTACT PARSON
Make the next
connection.
Tell us how you plan to use PARLITE 4035. Share the details that matter to your assembly.
Discuss an applicationsales@parsonadhesives.in