Epoxy adhesives
PARBOND 101
Fast cure all purpose adhesive designed to bond a wide variety of surfaces.
Request current TDS
ORIGINAL PRODUCT PHOTOGRAPHPARBOND / Epoxy adhesives
PARBOND 329
All purpose high performance adhesive with 30-minute working time. Excellent adhesion to wide variety of surfaces (Low odor version of Parbond 300).
Request current TDSEpoxy & polyurethane adhesivesIndustrial use
Selection depends on the actual materials, joint and service conditions. Confirm suitability before use.
APPLICATION / SELECTION
What to check
before selecting.
Selection considerations for PARBOND 329
Define the substrates, joint geometry and load conditions, then confirm the preparation and cure process for this grade. Where components must be mixed, check the specified ratio and mixing method, and allow for dispensing, positioning and fixture removal in the assembly sequence.
Read the selection guide01 / TECHNICAL OVERVIEW
Technical properties
Typical properties from the available product literature. Values are tied to the stated test conditions and do not replace the current technical data sheet.
| Fixture Time (min) | 50–60 |
|---|---|
| Hardness Shore D | 78 |
| Overlap Shear Strength (psi) | 2,500 – 2,900 |
Where data is incomplete or inconsistent across source documents, a value is not shown. Request the current TDS for final selection.
02 / DOCUMENTATION
Request documentation
Request the current TDS, safety data sheet or catalogue. Our team will confirm the relevant document and respond to your enquiry.
Need the current technical data sheet?
Include PARBOND 329 in your application brief and request the current grade-specific documentation.
Request technical dataSAFETY DOCUMENTATIONRequest the safety data sheetConfirm handling, storage and safety information with our team.
PDF / PRODUCT CATALOGUERequest the Parson product catalogueOriginal catalogue • specifications and availability subject to confirmation
03 / BEFORE YOU SPECIFY
A product is part
of a process.
- 01Identify the exact substrates and surface condition.
- 02Define joint geometry, operating conditions and process time.
- 03Review the current TDS and safety data before handling.
- 04Validate the adhesive on representative assemblies.
CONTINUE EXPLORING
Related grades.
All PARBOND products
Epoxy adhesives
PARBOND 150
All purpose high strength adhesive with 5 min working time. Excellent adhesion to wide variety of surfaces.
Request current TDS
Epoxy adhesives
PARBOND 300
All purpose high performance adhesive with medium cure speed. Excellent adhesion to wide variety of surfaces.
Request current TDSCONTACT PARSON
Make the next
connection.
Tell us how you plan to use PARBOND 329. Share the details that matter to your assembly.
Discuss an applicationsales@parsonadhesives.in